Qt6 development packages, nasm, additional build tools, and a C++23 capable compiler like g++-13 or clang-17 are required.
CMake 3.25 or newer must be available in $PATH.
Note
In all of the below lists of packages, the Qt6 multimedia package is not needed if your Linux system supports PulseAudio.
sudo apt install autoconf autoconf-archive automake build-essential ccache cmake curl fonts-liberation2 git libgl1-mesa-dev nasm ninja-build pkg-config qt6-base-dev qt6-tools-dev-tools qt6-wayland tar unzip zip
- Recommendation: Install
CMake 3.25
or newer from Kitware's apt repository:
Note
This repository is Ubuntu-only
# Add Kitware GPG signing key
wget -O - https://apt.kitware.com/keys/kitware-archive-latest.asc 2>/dev/null | gpg --dearmor - | sudo tee /usr/share/keyrings/kitware-archive-keyring.gpg >/dev/null
# Optional: Verify the GPG key manually
# Use the key to authorize an entry for apt.kitware.com in apt sources list
echo "deb [signed-by=/usr/share/keyrings/kitware-archive-keyring.gpg] https://apt.kitware.com/ubuntu/ $(lsb_release -sc) main" | sudo tee /etc/apt/sources.list.d/kitware.list
# Update apt package list and install cmake
sudo apt update -y && sudo apt install cmake -y
- Recommendation: Install
clang-17
or newer from LLVM's apt repository:
# Add LLVM GPG signing key
sudo wget -O /usr/share/keyrings/llvm-snapshot.gpg.key https://apt.llvm.org/llvm-snapshot.gpg.key
# Optional: Verify the GPG key manually
# Use the key to authorize an entry for apt.llvm.org in apt sources list
echo "deb [signed-by=/usr/share/keyrings/llvm-snapshot.gpg.key] https://apt.llvm.org/$(lsb_release -sc)/ llvm-toolchain-$(lsb_release -sc)-18 main" | sudo tee -a /etc/apt/sources.list.d/llvm.list
# Update apt package list and install clang and associated packages
sudo apt update -y && sudo apt install clang-18 clangd-18 clang-format-18 clang-tidy-18 lld-18 -y
- Alternative: Install gcc-13 or newer from Ubuntu Toolchain PPA:
sudo add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt update && sudo apt install g++-13 libstdc++-13-dev
- Recommendation: Install PulseAudio development package:
sudo apt install libpulse-dev
- Alternative: Install Qt6's multimedia package:
sudo apt install qt6-multimedia-dev
sudo pacman -S --needed autoconf-archive automake base-devel ccache cmake curl libgl nasm ninja qt6-base qt6-multimedia qt6-tools qt6-wayland ttf-liberation tar unzip zip
sudo dnf install autoconf-archive automake ccache cmake curl liberation-sans-fonts libglvnd-devel nasm ninja-build perl-FindBin perl-IPC-Cmd qt6-qtbase-devel qt6-qtmultimedia-devel qt6-qttools-devel qt6-qtwayland-devel tar unzip zip zlib-ng-compat-static
sudo zypper install autoconf-archive automake ccache cmake curl gcc13 gcc13-c++ liberation-fonts libglvnd-devel nasm ninja qt6-base-devel qt6-multimedia-devel qt6-tools-devel qt6-wayland-devel tar unzip zip
The build process requires at least python3.7; openSUSE Leap only features Python 3.6 as default, so it is recommendable to install package python311 and create a virtual environment (venv) in this case.
sudo xbps-install -Su # (optional) ensure packages are up to date to avoid "Transaction aborted due to unresolved dependencies."
sudo xbps-install -S git bash gcc python3 curl cmake zip unzip linux-headers make pkg-config autoconf automake autoconf-archive nasm MesaLib-devel ninja qt6-base-devel qt6-multimedia-devel qt6-tools-devel qt6-wayland-devel
Note
Ladybird's build system uses vcpkg to vendor third-party dependencies, which proves undesirable to use with Nix for several reasons.
As a result, using ladybird.sh
to compile and run Ladybird will fail. Therefore, it is necessary to use system packages provided by the dev-shell.
To build the project, first enter the shell:
nix develop
# With a custom entrypoint, for example, your favorite shell
nix develop --command bash
# Using nix-shell
nix-shell UI
# Using nix-shell and a custom shell
nix-shell UI --command bash
Then invoke cmake
directly. For example:
cmake -GNinja -BBuild/release
Finally, run ninja
(or the generator you're using) to start the build:
ninja -CBuild/release
For more information, see Custom CMake build directory and Running manually.
Xcode 14 versions before 14.3 might crash while building ladybird. Xcode 14.3 or clang from homebrew may be required to successfully build ladybird.
xcode-select --install
brew install autoconf autoconf-archive automake ccache cmake nasm ninja pkg-config
If you wish to use clang from homebrew instead:
brew install llvm@18
If you also plan to use the Qt chrome on macOS:
brew install qt
Note
It is recommended to add your terminal application (i.e. Terminal.app or iTerm.app) to the system list of developer tools. Doing so will reduce slow startup time of freshly compiled binaries, due to macOS validating the binary on its first run. This can be done in the "Developer Tools" section of the "Privacy & Security" system settings.
WSL2 is the supported way to build Ladybird on Windows. An experimental native build is being setup but does not fully build.
-
Create a WSL2 environment using one of the Linux distros listed above. Ubuntu or Fedora is recommended.
-
Install the required packages for the selected Linux distro in the WSL2 environment.
WSL1 is known to have issues. If you run into problems, please use WSL2.
MinGW/MSYS2 are not supported.
Note
This only gets the cmake to configure. There is still a lot of work to do in terms of getting it to build.
In order to get pkg-config available for the vcpkg install, you can use Chocolatey to install it.
To install Chocolatey, see https://chocolatey.org/install
.
Then Install pkg-config using chocolatey.
choco install pkgconfiglite -y
Note that OpenIndiana's latest GCC port (GCC 11) is too old to build Ladybird, so you need Clang, which is available in the repository.
pfexec pkg install clang-17 cmake libglvnd ninja qt6
pkgman install cmake cmd:python3 ninja openal_devel qt6_base_devel qt6_multimedia_devel qt6_tools_devel
On a Unix-like platform, install the prerequisites for that platform and then see the Android Studio guide.
Or, download a version of Gradle >= 8.0.0, and run the gradlew
program in UI/Android
The simplest way to build and run ladybird is via the ladybird.sh script:
# From /path/to/ladybird
./Meta/ladybird.sh run ladybird
On macOS, to build using clang from homebrew:
CC=$(brew --prefix llvm)/bin/clang CXX=$(brew --prefix llvm)/bin/clang++ ./Meta/ladybird.sh run
You may also choose to start it in gdb
using:
./Meta/ladybird.sh gdb ladybird
The above commands will build a Release version of Ladybird. To instead build a Debug version, run the
Meta/ladybird.sh
script with the value of the BUILD_PRESET
environment variable set to Debug
, like this:
BUILD_PRESET=Debug ./Meta/ladybird.sh run ladybird
Note that debug symbols are available in both Release and Debug builds.
Ladybird will be built with one of the following browser chromes (graphical frontends), depending on the platform:
- AppKit - The native chrome on macOS.
- Qt - The chrome used on all other platforms.
- Android UI - The native chrome on Android.
The Qt chrome is available on platforms where it is not the default as well (except on Android). To build the Qt chrome, install the Qt dependencies for your platform, and enable the Qt chrome via CMake:
# From /path/to/ladybird
cmake --preset default -DENABLE_QT=ON
To re-disable the Qt chrome, run the above command with -DENABLE_QT=OFF
.
The section lists out some particular error messages you may run into, and explains how to deal with them.
This error message is a red herring. We use vcpkg to manage our third-party dependencies, and this error is logged when something went wrong building those dependencies. The output in your terminal will vary depending on what exactly went wrong, but it should look something like:
error: building skia:x64-linux failed with: BUILD_FAILED
Elapsed time to handle skia:x64-linux: 1.6 s
-- Running vcpkg install - failed
CMake Error at Toolchain/Tarballs/vcpkg/scripts/buildsystems/vcpkg.cmake:899 (message):
vcpkg install failed. See logs for more information:
Build/release/vcpkg-manifest-install.log
Call Stack (most recent call first):
/usr/share/cmake-3.30/Modules/CMakeDetermineSystem.cmake:146 (include)
CMakeLists.txt:15 (project)
CMake Error: CMake was unable to find a build program corresponding to "Ninja". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
-- Configuring incomplete, errors occurred! See logs for more information:
Build/release/vcpkg-manifest-install.log
If the error is not immediately clear from the terminal output, be sure to check the specified vcpkg-manifest-install.log
.
for more information.
Ladybird requires resource files from the ladybird/Base/res directory in order to properly load icons, fonts, and other theming information. These files are copied into the build directory by special CMake rules. The expected location of resource files can be tweaked by packagers using the standard CMAKE_INSTALL_DATADIR variable. CMAKE_INSTALL_DATADIR is expected to be a path relative to CMAKE_INSTALL_PREFIX. If it is not, things will break.
The script Meta/ladybird.sh and the default preset in CMakePresets.json both define a build directory of
Build/release
. For distribution purposes, or when building multiple configurations, it may be useful to create a custom
CMake build directory.
The install rules in UI/cmake/InstallRules.cmake define which binaries and libraries will be
installed into the configured CMAKE_PREFIX_PATH or path passed to cmake --install
.
Note that when using a custom build directory rather than Meta/ladybird.sh, the user may need to provide a suitable C++ compiler (g++ >= 13, clang >= 14, Apple Clang >= 14.3) via the CMAKE_CXX_COMPILER and CMAKE_C_COMPILER cmake options.
cmake -GNinja -B MyBuildDir
# optionally, add -DCMAKE_CXX_COMPILER=<suitable compiler> -DCMAKE_C_COMPILER=<matching c compiler>
cmake --build MyBuildDir
ninja -C MyBuildDir run-ladybird
The Meta/ladybird.sh script will execute the run-ladybird
and debug-ladybird
custom targets.
If you don't want to use the ladybird.sh script to run the application, you can run the following commands:
To automatically run in gdb:
ninja -C Build/release debug-ladybird
To run without ninja rule on non-macOS systems:
./Build/release/bin/Ladybird
To run without ninja rule on macOS:
open -W --stdout $(tty) --stderr $(tty) ./Build/release/bin/Ladybird.app
# Or to launch with arguments:
open -W --stdout $(tty) --stderr $(tty) ./Build/release/bin/Ladybird.app --args https://ladybird.dev
There is an experimental GN build for Ladybird. It is not officially supported, but it is kept up to date on a best-effort basis by interested contributors. See the GN build instructions for more information.
In general, the GN build organizes ninja rules in a more compact way than the CMake build, and it may be faster on some systems. GN also allows building host and cross-targets in the same build directory, which is useful for managing dependencies on host tools when cross-compiling to other platforms.
Ladybird should be built with debug symbols first. This can be done by adding -DCMAKE_BUILD_TYPE=Debug
to the cmake command line,
or selecting the Build Type Debug in the CLion CMake profile.
After running Ladybird as suggested above with ./Meta/ladybird.sh run ladybird
, you can now in CLion use Run -> Attach to Process to connect. If debugging layout or rendering issues, filter the listing that opens for WebContent
and attach to that.
Now breakpoints, stepping and variable inspection will work.
If all you want to do is use Instruments, then an Xcode project is not required.
Simply run the ladybird.sh
script as normal, and then make sure to codesign the Ladybird binary with the proper entitlements to allow Instruments to attach to it.
./Meta/ladybird.sh build
ninja -C Build/release apply-debug-entitlements
# or
codesign -s - -v -f --entitlements Meta/debug.plist Build/release/bin/Ladybird.app
Now you can open the Instruments app and point it to the Ladybird app bundle.
If you want to use Xcode itself for debugging, you will need to generate an Xcode project.
The ladybird.sh
build script does not know how to generate Xcode projects, so creating the project must be done manually.
cmake -GXcode -B Build/release
After generating an Xcode project into the specified build directory, you can open ladybird.xcodeproj
in Xcode. The project has a ton of targets, many of which are generated code.
The only target that needs a scheme is the ladybird app bundle.
OpenIndiana needs some extra environment variables set to make sure it finds all the executables and directories it needs for the build to work. The cmake files are in a non-standard path that contains the Qt version (replace 6.2 with the Qt version you have installed) and you need to tell it to use clang and clang++, or it will use gcc and g++ from GCC 10 which is currently the default to build packages on OpenIndiana.
When running Ladybird, make sure that XDG_RUNTIME_DIR is set, or it will immediately crash as it doesn't find a writable directory for its sockets.
CMAKE_PREFIX_PATH=/usr/lib/qt/6.2/lib/amd64/cmake cmake -GNinja -B Build/release -DCMAKE_C_COMPILER=/usr/bin/clang -DCMAKE_CXX_COMPILER=/usr/bin/clang++
cmake --build Build/release
XDG_RUNTIME_DIR=/var/tmp ninja -C Build/release run